Choose your language 
SHAPED CANS Seamers
444
Technical Data
| Min-Max Diameter | 50-160 mm. |
| Mín. Max. Widht | 45 mm |
| Mín-Max Height | 25-100 mm. |
| Rotary clincher | 6 pistons |
| Seaming Heads | 1 |
| Output | 80-100 c.p.m. |
| Power | 3 HP |
| Air | 80 L/h 6 Kg/cm3 |
| Dimensions | 2.650 x 1.850 x 2.300 mm. |
| Volume | 11,3 m3 |
| Weight | 2.300 Kg |
| Format Modification | 5-6 hours |
| Height Modification | 10-20 minutes |
| * All the machines for irregular cans may also seam round cans. | |
Description
- Can feeder with synchronisation timing screw
- Cover feeder with finger chain
- Clinching station with 6 pistons allowing overfilling up to 10 mm.
- Clinching chucks with magnets for tin plate cover and special guides for aluminium covers.
- Clinching centerers to avoid deformation of overfilled cans
- One single seaming station
- Fast attack seaming technology (5 turns/seam).
- Pre-curling roll to even the covers flange specially in the curved zones
- 4 seaming rolls: (1) pre-curling, (1) 1st operation and (2) 2nd operation
- Electronic speed variator and PLC for control & synchronisation in the line
- Safety guards according to CE regulations
Options
- Cam grinding machine
- Lower plate pressure tester device
- Rotary ends with stampers
- Automatic greasing system with temporised pump
© SOMMETRADE | Developed by 
